{"product_id":"model-seamless-clamps-set-of-12-65-55mm-for-scale-models-miniatures","title":"Model Seamless Clamps Set of 12 — 65×55mm for Scale Models \u0026 Miniatures","description":"\u003ch2\u003eHold It Perfect. Every Single Time.\u003c\/h2\u003e\n\u003cp\u003ePrecision assembly demands precision tools. The \u003cstrong\u003eModel Seamless Clamp Set of 12\u003c\/strong\u003e is engineered specifically for scale modelers, miniature builders, and hobbyists who need a reliable, non-damaging hold while adhesives cure. At 65×55mm, these clamps are sized perfectly for plastic model parts, resin components, and delicate subassemblies — keeping everything flush, tight, and seamless.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Modelers Trust These Clamps\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeamless Pressure Distribution\u003c\/strong\u003e — Smooth jaw faces apply even clamping force without leaving marks or indentations on soft plastic or resin surfaces\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIdeal Size for Model Parts\u003c\/strong\u003e — 65×55mm footprint fits fuselage halves, hull panels, figure torsos, and most standard kit subassemblies\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSet of 12\u003c\/strong\u003e — Work on multiple glue joints simultaneously; no waiting between steps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConsistent Spring Tension\u003c\/strong\u003e — Firm enough to hold parts under pressure, gentle enough to avoid warping thin plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e — Built to withstand repeated use across hundreds of builds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility\u003c\/strong\u003e — Works with plastic cement, CA glue, epoxy, and PVA adhesives\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 65 × 55 mm per clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 12 clamps per set\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJaw Type:\u003c\/strong\u003e Seamless \/ smooth face (no serrations)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Adhesives:\u003c\/strong\u003e Plastic cement, CA glue, epoxy, PVA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuitable For:\u003c\/strong\u003e Plastic kits, resin models, wood models, miniatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerfect For\u003c\/h3\u003e\n\u003cp\u003eGunpla \u0026amp; plastic model kits · Resin miniature assembly · Ship \u0026amp; aircraft scale models · Architectural models · Diorama construction · Wargaming figure assembly\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eQ: Will these clamps leave marks on soft plastic or painted surfaces?\u003c\/h3\u003e\n\u003cp\u003eA: No. The seamless smooth jaw faces are specifically designed to distribute pressure evenly without leaving indentations or scratches on plastic, resin, or pre-painted surfaces. For extra protection on finished surfaces, a small piece of masking tape between the jaw and the part is recommended.\u003c\/p\u003e\n\n\u003ch3\u003eQ: What is the maximum thickness these clamps can hold?\u003c\/h3\u003e\n\u003cp\u003eA: The clamps are optimized for typical scale model part thicknesses. They are best suited for parts up to approximately 20–25mm in combined thickness. For thicker assemblies, additional clamps or rubber bands may be needed.\u003c\/p\u003e\n\n\u003ch3\u003eQ: Can I use these with CA (super) glue?\u003c\/h3\u003e\n\u003cp\u003eA: Yes. These clamps work with all common modeling adhesives including CA glue, plastic cement, epoxy, and PVA. Ensure the clamp jaws do not contact the glue joint directly to avoid bonding the clamp to the part.\u003c\/p\u003e\n\n\u003ch3\u003eQ: Why do I need 12 clamps?\u003c\/h3\u003e\n\u003cp\u003eA: Complex builds — such as aircraft fuselages, ship hulls, or multi-part figures — often require holding several joints simultaneously while adhesive cures. Having 12 clamps on hand means you can work continuously without waiting for each joint to set before moving to the next.\u003c\/p\u003e\n\n\u003ch3\u003eQ: Are these suitable for resin miniatures?\u003c\/h3\u003e\n\u003cp\u003eA: Yes. The gentle, even clamping pressure makes these ideal for resin parts, which can be more brittle than styrene plastic. The smooth jaws minimize the risk of cracking or chipping delicate resin components.\u003c\/p\u003e\n\n\u003ch3\u003eQ: How do I clean the clamps after use?\u003c\/h3\u003e\n\u003cp\u003eA: Wipe the jaws with a dry cloth or cotton swab after each use. For cured adhesive residue, a small amount of isopropyl alcohol on a cotton swab will clean most glue types without damaging the clamp material.\u003c\/p\u003e","brand":"TTpen","offers":[{"title":"Default Title","offer_id":55435256398129,"sku":"MC6555P12","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/2630\/3793\/files\/Model-Seamless-Clamps.jpg?v=1784900854","url":"https:\/\/www.ttpen.com\/products\/model-seamless-clamps-set-of-12-65-55mm-for-scale-models-miniatures","provider":"TTpen","version":"1.0","type":"link"}